Automotive and workshops

AT-001 · One piece

We confirm feasibility after reviewing the sample or drawing.

The bracket mounts a sensor to the vehicle and keeps it aimed at the point it needs to read.

AT-002 · One piece

We confirm feasibility after reviewing the sample or drawing.

The bracket holds the camera steady and keeps its field of view aligned with the area it needs to cover.

AT-003 · One piece

We confirm feasibility after reviewing the sample or drawing.

The mount keeps the GPS module in an accessible position and provides clearance for its cable.

AT-004 · One piece

We confirm feasibility after reviewing the sample or drawing.

The bezel finishes the display opening and covers the gap between the screen module and the surrounding panel.

AT-005 · One piece

We confirm feasibility after reviewing the sample or drawing.

The vent deflector directs air leaving the outlet toward the desired area of the cabin.

AT-006 · One piece

We confirm feasibility after reviewing the sample or drawing.

The clip snaps into its slot and holds trim against its backing without visible fasteners.

AT-007 · One piece

We confirm feasibility after reviewing the sample or drawing.

The retainer keeps a fitted component seated so it does not shift during use.

AT-008 · One piece

We confirm feasibility after reviewing the sample or drawing.

The plug closes an unused opening and covers the exposed edge of the panel.

AT-009 · One piece

We confirm feasibility after reviewing the sample or drawing.

A spacer sets the gap between parts, while a bushing centres a screw or shaft in its opening.

AT-010 · One piece

We confirm feasibility after reviewing the sample or drawing.

The enclosure houses the circuit board and provides defined locations for connectors and mounting points.

AT-011 · One piece

We confirm feasibility after reviewing the sample or drawing.

The holder keeps the cable on its intended route and away from edges and moving parts.

AT-012 · One piece

We confirm feasibility after reviewing the sample or drawing.

The adapter joins two differently shaped or sized ventilation openings where space is limited.

AT-013 · One piece

We confirm feasibility after reviewing the sample or drawing.

A stop limits travel at the end of a movement. A damper deforms on contact to soften the impact and reduce rattling.

AT-014 · One piece

We confirm feasibility after reviewing the sample or drawing.

The cover shields a small area from rubbing during use or installation.

AT-015 · One piece

We confirm feasibility after reviewing the sample or drawing.

The spare restores a specific assembly function when the original part is hard to source.

AT-016 · One piece

We confirm feasibility after reviewing the sample or drawing.

The service fixture holds a part in position so a workshop operation can be repeated consistently.

AT-017 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The long trim follows the dashboard contour and covers the joint between interior surfaces.

AT-018 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The long moulding finishes a continuous edge or seam along the interior.

AT-019 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The fascia frames controls, displays and vents while covering the gaps between them.

AT-020 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The trim finishes the centre console while leaving controls and storage openings accessible.

AT-021 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The trim covers the inner door surface and finishes openings for handles or controls.

AT-022 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The interior cover conceals auxiliary components and continues the surrounding trim surface.

AT-023 · Segmented

We confirm feasibility after reviewing the sample or drawing.

The auxiliary duct carries air between separated cabin outlets along the available route.